SpecEasy 4.0.0
dotnet add package SpecEasy --version 4.0.0
NuGet\Install-Package SpecEasy -Version 4.0.0
<PackageReference Include="SpecEasy" Version="4.0.0" />
paket add SpecEasy --version 4.0.0
#r "nuget: SpecEasy, 4.0.0"
// Install SpecEasy as a Cake Addin #addin nuget:?package=SpecEasy&version=4.0.0 // Install SpecEasy as a Cake Tool #tool nuget:?package=SpecEasy&version=4.0.0
<h1 align="center"><img src="https://raw.github.com/speceasy/speceasy/master/speceasy_logo.png" alt="SpecEasy" height="85"></h1>
SpecEasy is a BDD-based unit testing framework that allows you to easily and quickly write tests using a fluid interface that reduces the amount of code needed to create tests.
What does SpecEasy require?
SpecEasy is currently built on and requires the NUnit test framework. If you're using NUnit, then it's as simple as:
- Install SpecEasy using NuGet
- Start writing specs the easy way!
SpecEasy also uses RhinoMocks and NUnit; these dependencies will be installed via NuGet if needed.
A note on versions
There are currently three versions of SpecEasy available on NuGet:
- Version 1.0.0 - Targets .NET 3.5 or higher
- Version 2.0.0 - Targets .NET 4.5.1 or higher and adds support for testing async methods
- Version 2.1.0 - Fixes hiding of method under test exceptions and adds support for .NET 4.5.
- Version 3.0.0 - Updates NUnit dependency from NUnit 2.6.4 to NUnit 3.8.1
- Version 3.1.0 - Updated NUnit dependency from NUnit 3.8.1 to NUnit 3.10.1
- Version 4.0.0 - Updated NUnit dependency from NUnit 3.10.1 to NUnit 3.14.0, replaced RhinoMocks with NSubstitute, added support for .NET Standard 2.0 and 2.1, added support for .NET 6.0, .NET 7.0, and .NET 8.0.
Quickstart Guide
- Inherit from
Spec<T>
, where T is the type you want to test. SpecEasy give you access to an instance of T through a base variable called SUT (System Under Test), and automatically new it up on demand. - No need to decorate your code with test attributes.
Spec<T>
handles that for you. - Use
When(string, Action)
to test what you want to test (Action). - Use
Given(string, Action).Verify(Action)
for set up code (Arrange). - Use
Then(string, Action)
to verify the results (Assert). - Nest
Given(string Action)
method calls to handle more complicated set up. - Use
Set<T>(T)
to set dependencies that will be injected into your SUT. - Use
Get<T>()
to get access to dependencies automatically created for your SUT. Chain calls toGet<T>()
with calls toStub<T>(Action)
to set up mocks for dependencies. - Use
AssertWasCalled<T>(Action)
andAssertWasNotCalled<T>(Action)
to check if methods or properties were called on dependencies.
Going a bit deeper
Let's use FizzBuzz as a sample implementation to test. As a reminder, the rules for FizzBuzz are as follows:
- The method should take in a number and return a string
- For most numbers, return the string value for that number, i.e., 1 returns "1"
- For multiples of 3, it should return "fizz"
- For multiples of 5, it should return "buzz"
- For multiples of 3 and 5, it should return "fizzbuzz"
We'll start out with a base FizzBuzz implementation:
public class FizzBuzz
{
public string Do(int number)
{
return "";
}
}
Let's get started writing specs.
1.) Inherit from Spec
public class FizzBuzzSpecs : SpecEasy.Spec<FizzBuzz> { }
2.) Test the simplest case first
SpecEasy doesn't require that you decorate your code with attributes to run tests. It uses Given/When/Then syntax, and every call to Then will result in a test being run. The first step to check if I pass in 1, does it return "1".
public void FizzBuzzDo()
{
string result = string.Empty;
int input = 0;
When("running FizzBuzz", () => result = SUT.Do(input));
Given("an input of 1", () => input = 1).Verify(() =>
Then("it should return a stringified 1", () => Assert.That(result, Is.EqualTo("1"))));
}
Now, if we run the test, it fails.
Test 'TrackAbout.Mobile.Test.Unit.FizzBuzz.FizzBuzzSpecs.Spec.Verify' failed: System.Exception : Specifications failed!
----> NUnit.Framework.AssertionException : Expected string length 1 but was 0. Strings differ at index 0.
Expected: "1"
But was: <string.Empty>
-----------^
at SpecEasy.Spec.Verify()
--AssertionException
FizzBuzzSpecs.cs(16,0): at FizzBuzzSpecs.<>c__DisplayClass4.<FizzBuzzDo>b__2()
at SpecEasy.Spec.VerifySpecs(List`1 contextList)
0 passed, 1 failed, 0 skipped
Once we change the FizzBuzz class to allow the test to pass, we see the following output:
------------ FULL RESULTS ------------
given an input of 1
when running FizzBuzz
it should return a stringified 1
1 passed, 0 failed, 0 skipped
3.) Test another case
We can have multiple Given/Then combinations, where we can set up different expectations and assert different things. So if we wanted to test an input of 2, we can add another given/then combination:
public void FizzBuzzDo()
{
string result = string.Empty;
int input = 0;
When("running FizzBuzz", () => result = SUT.Do(input));
Given("an input of 1", () => input = 1).Verify(() =>
Then("it should return a stringified 1", () => Assert.That(result, Is.EqualTo("1"))));
Given("an input of 2", () => input = 2).Verify(() =>
Then("it should return a stringified 2", () => Assert.That(result, Is.EqualTo("2"))));
}
Once we fix up FizzBuzz, we get this output:
------------ FULL RESULTS ------------
given an input of 1
when running FizzBuzz
then it should return a stringified 1
given an input of 2
when running FizzBuzz
then it should return a stringified 2
1 passed, 0 failed, 0 skipped
4.) Finish up the tests
You can continue the implementation of FizzBuzz this way, and end up with tests like so:
public void FizzBuzzDo()
{
string result = string.Empty;
int input = 0;
When("running FizzBuzz", () => result = SUT.Do(input));
Given("an input of 1", () => input = 1).Verify(() =>
Then("it should return a stringified 1", () => Assert.That(result, Is.EqualTo("1"))));
Given("an input of 2", () => input = 2).Verify(() =>
Then("it should return a stringified 2", () => Assert.That(result, Is.EqualTo("2"))));
Given("an input of 3", () => input = 3).Verify(() =>
Then("it should return fizz", () => Assert.That(result, Is.EqualTo("fizz"))));
Given("an input of a multiple of 3", () => input = 9).Verify(() =>
Then("it should return fizz", () => Assert.That(result, Is.EqualTo("fizz"))));
Given("an input of 5", () => input = 5).Verify(() =>
Then("it should return buzz", () => Assert.That(result, Is.EqualTo("buzz"))));
Given("an input of a multiple of 5", () => input = 20).Verify(() =>
Then("it should return buzz", () => Assert.That(result, Is.EqualTo("buzz"))));
Given("an input of a multiple of 3 and 5", () => input = 30).Verify(() =>
Then("it should return fizzbuzz", () => Assert.That(result, Is.EqualTo("fizzbuzz"))));
}
The test results will look like this:
------------ FULL RESULTS ------------
given an input of 1
when running FizzBuzz
then it should return a stringified 1
given an input of 2
when running FizzBuzz
then it should return a stringified 2
given an input of 3
when running FizzBuzz
then it should return fizz
given an input of a multiple of 3
when running FizzBuzz
then it should return fizz
given an input of 5
when running FizzBuzz
then it should return buzz
given an input of a multiple of 5
when running FizzBuzz
then it should return buzz
given an input of a multiple of 3 and 5
when running FizzBuzz
then it should return fizzbuzz
1 passed, 0 failed, 0 skipped
Dependencies
One thing that wasn't mentioned in the above spec is that SpecEasy automatically instantiated your class under test for you, and gave you access to it through a variable called SUT
(system under test). But what if your SUT has dependencies? SpecEasy can handle that for you too, either automatically, or you can determine what values to use for your class.
Let's say I have a class that takes in two dependencies as constructor parameters:
public class CarService
{
private readonly ICar car;
private readonly IDriver driver;
public CarService(ICar car, IDriver driver)
{
this.car = car;
this.driver = driver;
}
public void Drive()
{
// Make the driver drive the car
}
}
If we want to test the Drive method, most likely what we want to do is ensure that certain methods are called on the car and driver. To do that, we need to be able to have access to the car and driver objects in our test. You can do this manually, using the Set<T>(T)
method:
public class CarServiceSpec
{
public Drive()
{
ICar car = new FakeCar();
IDriver driver = FakeDriver();
Set<ICar>(car);
Set<IDriver>(driver);
When("driving a car", () => SUT.Drive());
Then("the driver should start the car", () => driver.AssertStartWasCalledWithParameter(car));
}
}
This requires you to make a fake for every parameter and then implement code to track method calls. It works, but can be a lot of extra test code. SpecEasy can eliminate this code by using mocks. If we allow SpecEasy to create mocks for us, the above code becomes:
public class CarServiceSpec
{
public Drive()
{
When("driving a car", () => SUT.Drive());
Then("the driver should start the car", () => AssertWasCalled<IDriver>(d => d.Start(Get<ICar>()));
}
}
The Spec<T>
base class has a method AssertWasCalled<T>()
that can be used to determine whether a method was called or a property was set on a dependency.
Stubs on Dependencies
Since SpecEasy handles creating your dependencies for you, it also has a way to set up stubs on those dependencies. For example, in the above scenario, let's say that you need to be able to get keys from the driver. You can stub that in a Given() call.
public class CarServiceSpec
{
public Drive()
{
var keys = new CarKey();
When("driving a car", () => SUT.Drive());
Given("the driver is carrying keys", => () => Get<IDriver>().Stub(d => d.GetKeys()).Return(keys)).Verify(() =>
Then("the driver should start the car", () => AssertWasCalled<IDriver>(d => d.Start(Get<ICar>())));
}
}
Multiple Givens
If SpecEasy was just an easier way to write standard tests, it wouldn't be all that useful. Where SpecEasy shines is in its ability to allow nested Given statements and allow tests to be put at any level of the Given hierarchy. This allows you to have complicated set up code and not have to duplicate that for each test that needs that set up code.
Continuing with the above scenario, let's imagine we're testing the following code on CarService's Drive() method.
public void Drive()
{
var keys = driver.GetKeys();
if (car.Accepts(keys))
{
driver.Start(car);
}
else
{
driver.FindKeysFor(car);
}
}
We have three tests we want to write to cover all of the things going on here:
- driver.GetKeys() is called
- if the car accepts the keys, that the driver starts the car
- If the car doesn't accept the keys, that the driver doesn't start the car
We can do this using multiple nested calls to Given() for the different setups we need:
public class CarServiceSpec
{
public Drive()
{
var keys = new CarKey();
When("driving a car", () => SUT.Drive());
Given("the driver is carrying keys", => () => Get<IDriver>().Stub(d => d.GetKeys()).Return(keys)).Verify(() => {
Then("the driver should show her keys", () => AssertWasCalled<IDriver>(d => d.GetKeys()));
Given("the car accepts the keys", () => Get<ICar>().Stub(c => c.Accepts(keys)).Return(true)).Verify(() =>
Then("it should start the car", () => AssertWasCalled<IDriver>(d => d.Start(Get<ICar>()))));
Given("the car does not accept the keys", () => Get<ICar>().Stub(c => c.Accepts(keys)).Return(false)).Verify(() =>
Then("it should not start the car", () => AssertWasNotCalled<IDriver>(d => d.Start(Arg<ICar>.Is.Anything))));
});
}
}
For each call to Then(), SpecEasy walks up the call stack, running each Given(), then the When(), and finally, the Then(). So, for the above tests, it would output the following:
------------ FULL RESULTS ------------
given the driver is carrying keys
when driving a car
then the driver should show her keys
given the driver is carrying keys
and the car accepts the keys
when driving a car
then it should start the car
given the driver is carrying keys
and the car does not accept the keys
when driving a car
then it should not start the car
1 passed, 0 failed, 0 skipped
Given Alternatives
There are some alternative syntaxes to Given when setting up tests. You can also specify context using And()
or But()
, which are functionally equivalent to Given()
but modify the resulting test description. The above example can be written as follows:
public class CarServiceSpec
{
public Drive()
{
var keys = new CarKey();
When("driving a car", () => SUT.Drive());
Given("the driver is carrying keys", => () => Get<IDriver>().Stub(d => d.GetKeys()).Return(keys)).Verify(() => {
Then("the driver should show her keys", () => AssertWasCalled<IDriver>(d => d.GetKeys()));
And("the car accepts the keys", () => Get<ICar>().Stub(c => c.Accepts(keys)).Return(true)).Verify(() =>
Then("it should start the car", () => AssertWasCalled<IDriver>(d => d.Start(Get<ICar>()))));
But("the car does not accept the keys", () => Get<ICar>().Stub(c => c.Accepts(keys)).Return(false)).Verify(() =>
Then("it should not start the car", () => AssertWasNotCalled<IDriver>(d => d.Start(Arg<ICar>.Is.Anything))));
});
}
}
This makes the code read a little more closely to the test output, and in the case of But()
calls, it actually modifies the test output. This can be an easy way to make the test output read better too. The output for the above tests will be:
------------ FULL RESULTS ------------
given the driver is carrying keys
when driving a car
then the driver should show her keys
given the driver is carrying keys
and the car accepts the keys
when driving a car
then it should start the car
given the driver is carrying keys
but the car does not accept the keys
when driving a car
then it should not start the car
1 passed, 0 failed, 0 skipped
Multiple Expectations
You may find the need to make multiple assertions, or verify multiple expectations, for a single Given. This can be done by using multiple Then
method calls, either by listing them as multiple statements within a function provided to Verify
, or as a single expression of chained Then
methods provided to Verify
.
public void MultipleStatements()
{
string result = string.Empty;
int input = 0;
When("running FizzBuzz", () => result = SUT.Do(input));
Given("an input of a multiple of 3 and 5", () => input = 30).Verify(() =>
{
Then("it should return a string starting with fizz", () => Assert.That(result, Is.StringStarting("fizz")));
Then("it should return a string ending with buzz", () => Assert.That(result, Is.StringEnding("buzz")));
});
}
public void ChainedExpression()
{
string result = string.Empty;
int input = 0;
When("running FizzBuzz", () => result = SUT.Do(input));
Given("an input of a multiple of 3 and 5", () => input = 30).Verify(() =>
Then("it should return a string starting with fizz", () => Assert.That(result, Is.StringStarting("fizz")))
.Then("it should return a string ending with buzz", () => Assert.That(result, Is.StringEnding("buzz"))));
}
Either form will result in the following output:
------------ FULL RESULTS ------------
given an input of a multiple of 3 and 5
when running FizzBuzz
then it should return a string starting with fizz
and it should return a string ending with buzz
Specifications for abstract classes
Thanks to RhinoMocks support for partial mocks, it is possible to write specs for abstract classes. Consider the following class:
public abstract class AbstractAdderClass
{
public int Add10ToCalculatedInteger()
{
return CalculateInteger() + 10;
}
public abstract int CalculateInteger();
}
It's possible to write specs for this class using the standard Spec<T> base class. SpecEasy will take care of creating a instance of the abstract class, which can then have abstract methods or properties stubbed out using RhinoMocks. The following specs provide an example of this:
public class PartialMockSpec : Spec<AbstractAdderClass>
{
public void Add10ToCalculatedInteger()
{
var result = 0;
When("adding 10 to the calculated integer", () => result = SUT.Add10ToCalculatedInteger());
Given("the calculated integer is 10", () => SUT.Stub(s => s.CalculateInteger()).Return(10)).Verify(() =>
Then("the result is 20", () => Assert.AreEqual(20, result)));
}
}
BDD-style assertions
In the interest of remaining lightweight and flexible, SpecEasy doesn't implement or enforce a certain style of writing assertions. You are free to use any type of assertions that throw an exception upon failure. The examples above use the standard NUnit Assert
class for familiarity.
An alternative is to use BDD-style extension methods to make your tests more readable. Two lightweight libraries that work well with SpecEasy are Should:
using Should;
...
Given("an input of 1", () => input = 1).Verify(() =>
Then("it should return a stringified 1", () => result.ShouldEqual("1")));
…and Shouldly:
using Shouldly;
...
Given("an input of 1", () => input = 1).Verify(() =>
Then("it should return a stringified 1", () => result.ShouldBe("1")));
You can combine SpecEasy with any assertion framework; the core SpecEasy assembly takes no dependencies on any assertion library. The SpecEasy.Specs
project in this repository has examples of using the Should library.
License
SpecEasy is released under the MIT license.
Product | Versions Compatible and additional computed target framework versions. |
---|---|
.NET | net5.0 was computed. net5.0-windows was computed. net6.0 is compatible. net6.0-android was computed. net6.0-ios was computed. net6.0-maccatalyst was computed. net6.0-macos was computed. net6.0-tvos was computed. net6.0-windows was computed. net7.0 was computed. net7.0-android was computed. net7.0-ios was computed. net7.0-maccatalyst was computed. net7.0-macos was computed. net7.0-tvos was computed. net7.0-windows was computed. net8.0 is compatible. net8.0-android was computed. net8.0-browser was computed. net8.0-ios was computed. net8.0-maccatalyst was computed. net8.0-macos was computed. net8.0-tvos was computed. net8.0-windows was computed. |
.NET Core | netcoreapp2.0 was computed. netcoreapp2.1 was computed. netcoreapp2.2 was computed. netcoreapp3.0 was computed. netcoreapp3.1 was computed. |
.NET Standard | netstandard2.0 is compatible. netstandard2.1 was computed. |
.NET Framework | net461 was computed. net462 was computed. net463 was computed. net47 was computed. net471 was computed. net472 was computed. net48 was computed. net481 was computed. |
MonoAndroid | monoandroid was computed. |
MonoMac | monomac was computed. |
MonoTouch | monotouch was computed. |
Tizen | tizen40 was computed. tizen60 was computed. |
Xamarin.iOS | xamarinios was computed. |
Xamarin.Mac | xamarinmac was computed. |
Xamarin.TVOS | xamarintvos was computed. |
Xamarin.WatchOS | xamarinwatchos was computed. |
-
.NETStandard 2.0
- NSubstitute (>= 5.1.0)
- NUnit (>= 3.14.0)
-
net6.0
- NSubstitute (>= 5.1.0)
- NUnit (>= 3.14.0)
-
net8.0
- NSubstitute (>= 5.1.0)
- NUnit (>= 3.14.0)
NuGet packages
This package is not used by any NuGet packages.
GitHub repositories
This package is not used by any popular GitHub repositories.
Version 2.1.0 of SpecEasy includes:
- Prevent exceptions in the method under test from being ignored when there is also an assertion failure. See https://github.com/speceasy/speceasy/pull/24.
- Added the ability to detect and use non-public constructors when constructing the SUT.
- Enable the testing of abstract classes.
- Support for .NET 4.5 in addition to the existing .NET 4.5.1 support.
- Include spec method names as prefix for test case description.
- Added `And` and `But` spec context methods. These methods set up context identically to the original `Given` methods but are provided as a way to improve readability.
- Several other minor fixes and improvements.
Versions 3.0.x of SpecEasy include:
- Support for NUnit 3.8.x
- Support for .NET 4.5.2, .NET 4.6, .NET 4.6.1, and .NET 4.6.2
Versions 3.1.x of SpecEasy include:
- Support for NUnit 3.10.x
- Support for .NET 4.7, and .NET 4.7.1
Versions 4.0.x of SpecEasy include:
- Support for NUnit 3.14.x
- Support for .NET 4.7.2, .NET 4.8, .NET 4.8.1; .NET Standard 2.0., .NET Standard 2.1, .NET 6.0, .NET 7.0, and .NET 8.0
- Replaces RhinoMocks with NSubstitute, which necessitates dropping support for NET Framework support prior to 4.6.1