SiglentSCPI 1.0.1
dotnet add package SiglentSCPI --version 1.0.1
NuGet\Install-Package SiglentSCPI -Version 1.0.1
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package.
<PackageReference Include="SiglentSCPI" Version="1.0.1" />
For projects that support PackageReference, copy this XML node into the project file to reference the package.
paket add SiglentSCPI --version 1.0.1
The NuGet Team does not provide support for this client. Please contact its maintainers for support.
#r "nuget: SiglentSCPI, 1.0.1"
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package.
// Install SiglentSCPI as a Cake Addin
#addin nuget:?package=SiglentSCPI&version=1.0.1
// Install SiglentSCPI as a Cake Tool
#tool nuget:?package=SiglentSCPI&version=1.0.1
The NuGet Team does not provide support for this client. Please contact its maintainers for support.
A C# library for the Siglent SPD3303X Series Bench Supply,it does not utilize the Ni Visa Driver/API
- Command Set for Siglent`s SPD3303X-E as listed on the user manual
The following commands is what its implemented on the library.
Getters
| Command | Expected return | Notes | DataType | Type | Unit |
|---|---|---|---|---|---|
*IDN? |
{Vendor},{ModelNumber},{SerialNumber},{Firmware Version},{Hardware Revision} | theMostUniversalCommand | String | Getter | N/D |
INSTrument? |
CHx | Gets The Active Channel | String | Getter | N/D |
MEASure:CURRent? CHx |
0.00 | ADC reading | Float | Getter | A |
MEASure:VOLTage? CHx |
0.00 | ADC reading | Float | Getter | V |
MEASure:POWEr? CHx |
0.00 | ADC reading or instrument calc | Float | Getter | W |
CHx:CURRent? |
0.00 | Set value | Float | Getter | A |
CHx:VOLTage? |
0.00 | Set value | Float | Getter | V |
SYSTem:STATus? |
0xSOMETHING | see "SystemStatus" Table for details | HEX | Getter | N/D |
Setters
| Command | Expected return | Notes | DataType | Type | Unit |
|---|---|---|---|---|---|
INSTrument CHx |
n/a | - | - | Setter | N/D |
CHx:CURRent {VAL} |
n/a | sets the CC | Float | Setter | A |
CHx:VOLTage {VAL} |
n/a | sets the output Voltage | Float | Setter | V |
OUTPut CHx,{ON/OFF} |
n/a | Turn on/off the specified channel | - | Setter | N/D |
OUTPut:TRACK {0/1/2} |
n/a | Sets the channel mode on Indie, Serial or Paralel | - | Setter | N/D |
OUTPut:WAVE CHx,{ON/OFF} |
n/a | Turn on/off the Waveform Display function of specified channel. | - | Setter | N/D |
*SAV {1/2/3/4/5} |
n/a | Save current state in nonvolatile memory | - | Setter | N/D |
*RCL {1/2/3/4/5} |
n/a | Recall state that had been saved from nonvolatile memory. | - | Setter | N/D |
- IP setup
Getters
| Command | Expected return | Description | Type |
|---|---|---|---|
DHCP? |
DHCP:ON | Query whether the automatic network parameters configuration function is turn on | Getter |
IPaddr? |
192.168.0.106 | Query the current IP address of the instrument | Getter |
MASKaddr? |
255.255.255.0 | Query the current subnet mask of the instrument | Getter |
GATEaddr? |
192.168.0.1 | Query the current gateway of the instrument | Getter |
Setters
| Command | Expected return | Description | Type |
|---|---|---|---|
DHCP {ON/OFF} |
n/a | Assign the network parameters (such as the IP address)for the instrument automatically. | Setter |
IPaddr {IP address} |
n/a | Assign a static Internet Protocol (IP) address for the instrument Note,Invalid when DHCP is on | Setter |
MASKaddr {NetMasK} |
n/a | Assign a subnet mask for the instrument Note,Invalid when DHCP is on | Setter |
GATEaddr {GateWay} |
n/a | Assign a gateway for the instrument Note,Invalid when DHCP is on | Setter |
Using the SYSTem:STATus? Command
THis command sums up the current status of the instrument , in to a hex that you have to proccses based on this :
The return info is hexadecimal format, but the actual state is binary, so you must change the return info into a binary. The state correspondence relationship is as follow
| Bit No. | Corresponding State |
|---|---|
| 0 | 0: CH1 CV mode; 1:CC Mode |
| 1 | 0: CH2 CV mode; 1: CH2 CC mode |
| 2,3 | 01: Independent mode; 10: Parallel mode 11:Series Mode (fromMemory) |
| 4 | 0: CH1 OFF 1: CH1 ON |
| 5 | 0: CH2 OFF 1: CH2 ON |
| 6 | 0: TIMER1 OFF 1: TIMER1 ON |
| 7 | 0: TIMER2 OFF 1: TIMER2 ON |
| 8 | 0: CH1 digital display; 1: CH1 waveform diplay |
| 9 | 0: CH2 digital display; 1: CH2 waveform diplay |
example:
- Base (CV/CV,Indie mode, CH1 off, CH2 OFF Timers off CH1/CH2 Digital Display) :
0x4 - CH1ON:
0x14 - CH2ON:
0x24 - Serial:
0xc
The Siglent name is a registered trademark of SIGLENT TECHNOLOGIES CO., LTD, in the United States and/or other countries. All other trademarks referenced in the Software or Documentation are the property of their respective owners.
This is an unofficial implementation. Usage of the Siglent name does not confer in any way, implied or otherwise,
endorsement by or association with SIGLENT TECHNOLOGIES CO., LTD.
| Product | Versions Compatible and additional computed target framework versions. |
|---|---|
| .NET | net6.0 is compatible. net6.0-android was computed. net6.0-ios was computed. net6.0-maccatalyst was computed. net6.0-macos was computed. net6.0-tvos was computed. net6.0-windows was computed. net7.0 was computed. net7.0-android was computed. net7.0-ios was computed. net7.0-maccatalyst was computed. net7.0-macos was computed. net7.0-tvos was computed. net7.0-windows was computed. net8.0 was computed. net8.0-android was computed. net8.0-browser was computed. net8.0-ios was computed. net8.0-maccatalyst was computed. net8.0-macos was computed. net8.0-tvos was computed. net8.0-windows was computed. |
Compatible target framework(s)
Included target framework(s) (in package)
Learn more about Target Frameworks and .NET Standard.
-
net6.0
- No dependencies.
NuGet packages
This package is not used by any NuGet packages.
GitHub repositories
This package is not used by any popular GitHub repositories.