CheckValidators 1.1.12
See the version list below for details.
dotnet add package CheckValidators --version 1.1.12
NuGet\Install-Package CheckValidators -Version 1.1.12
<PackageReference Include="CheckValidators" Version="1.1.12" />
paket add CheckValidators --version 1.1.12
#r "nuget: CheckValidators, 1.1.12"
// Install CheckValidators as a Cake Addin #addin nuget:?package=CheckValidators&version=1.1.12 // Install CheckValidators as a Cake Tool #tool nuget:?package=CheckValidators&version=1.1.12
Check Validators (.NET)
Author: Ryan Kueter
Updated: June, 2022
About
Check Validators is a free .NET library, available from the NuGet Package Manager, that provides the most flexible, simple, and powerful way to validate and guard your data. It provides a variety of user-defined validators that allow you to use LINQ to validate your data, in addition to over 190 built-in validators. And it allows you to write your own custom validators and use them in your project without modifying this library.
Targets:
- .NET 6
Introduction
Each "Check" contains validation rules that can be chained together using method extension syntax (builder pattern).
// Validating a date
try
{
DateTime datetime = DateTime.Now;
new Check<DateTime>(datetime)
.IfNull()
.IfDefault()
.IfNotUtcTime()
.IfNot(date => date == DateTime.Now.AddDays(-1), "The date was not yesterday!")
.ThrowErrors();
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
Output:
Errors: 1) The datetime format is not Utc, 2) The date was not yesterday!.
Or you can add the filename, line number, and parameter by using ThrowErrors(true):
Errors: 1) The datetime format is not Utc, 2) The date was not yesterday!, in Program.cs:line 48. (Parameter 'datetime <DateTime>')
A Realistic Example
One of the more powerful features of this library is the ability to use LINQ to validate custom datatypes and include other �Check� validators inside those validation rules. This can allow you to apply validators to collections.
Notice that the following checks are being used inside of user-defined validation rules.
- Check<string>(request.Email).IfNotEmail()
- Check<DateTime>(request.TimeStamp).IfNull().IfDefault().IfNotUtcTime()
- Check<string>(request.User).IfEquals("String Comparison Example", StringComparison.InvariantCulture)
- Check<string>(request.User).IfNotMatches("^letterstomatch", System.Text.RegularExpressions.RegexOptions.None)
//Validating a service request
try
{
var request = new MyServiceRequest();
new Check<MyServiceRequest>(request)
.IfNull()
/*
* Check if the email is valid.
*/
.If(request => request.Email == null, "The email address was null!")
.AndIf(request => new Check<string>(request.Email).IfNotEmail().HasErrors())
/*
* Check if the timestamp is valid
*/
.If(request => request.TimeStamp == default, "The timestamp was not set!")
.AndIf(request => new Check<DateTime>(request.TimeStamp).IfNull().IfDefault().IfNotUtcTime().HasErrors(), "An error occured with the timestamp")
.If(request => request.Id == 0)
.If(request => request.People is null || request.People.Count == 0)
.AndIf(request => request.People.Where(person => new Check<string>(person.Email).IfNull().IfNotEmail().HasErrors()).Any(), "A person in the list of people did not have a valid email address")
.AndIfNot(p => p.People.Where(x => x.Id > 0).Any())
.If(request => new Check<string>(request.User).IfEquals("String Comparison Example", StringComparison.InvariantCulture).HasErrors())
.If(request => new Check<string>(request.User).IfNotMatches("^rya", System.Text.RegularExpressions.RegexOptions.IgnoreCase).HasErrors())
.IfNot(request => request.Count > 20 && request.Count < 300)
.ThrowErrors(true);
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
Output:
Errors: 1) The email address was null!, 2) The timestamp was not set!, 3) A person in the list of people did not have a valid email address, 4) IfNot(request => request.Count > 20 && request.Count < 300), in Program.cs:line 24. (Parameter 'request <MyServiceRequest>')
Validations
Each validation rule provides a default error message that includes specifics about the causes of the error. Error messages for user-defined validation rules consist of the logic used in the validation rule or you specify your own custom error.
Utilities
Check validators comes with a number of utilities that can make validating data easier and more flexible. These utilities can be used inside of user-defined validation rules to create more powerful set of validations.
using CheckValidators;
string? data = "Adam Smith";
var c = new Check<string>(data)
.IfNull()
.IfEmptyOrWhitespace()
.IfLengthEquals(10)
.IfNot(s => s.Contains("keyword"), "The string does not contain the keyword.");
HasErrors()
If you want to determine if any validation errors occured, you could call HasErrors() to give you a boolean value.
GetErrors()
You can also retrieve each individual error for your own error handling.
// Getting errors
if (c.HasErrors())
{
foreach (var s in c.GetErrors())
{
Console.WriteLine(s);
}
}
IsValid()
IsValid() returns a boolean value depending on whether all the rules passed validation. If they do, it will return true. If one failed, it will return false. This can be useful for validation scenarios where you don't want to throw an error.
ThrowErrors()
ThrowErrors() will throw all the errors in a formatted error message. If you want to include the the filename, line number, and parameter, you can use ThrowErrors(true).
// Throwing errors
if (!c.IsValid())
{
try
{
c.ThrowErrors(true);
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
}
The expression above, for example, will throw the following errors:
Errors: 1) String length should not equal 10 characters, 2) The string does not contain the keyword, in Program.cs:line 5. (Parameter 'data <String>')
User-Defined Validation Rules
User-defined validation rules allow you to use LINQ to validate your data. When writing user-defined validation rules, you typically want to write your own error message. If you don't, the expression that fails will be displayed in the error.
If and IfNot
If and IfNot conditions allow you to use LINQ to query objects and lists in the object. If the expression is false, it will produce an error message.
If(user => user.User is null)
If(user => user.User is null, "Custom error message.")
// Default Error: If({expression})
IfNot(user => user.User is null)
IfNot(user => user.User is null, "Custom error message.")
// Default Error: IfNot({expression})
AndIf and AndIfNot
AndIf and AndIfNot are similar to If and IfNot conditions, except that they only execute when the previous If or IfNot condition is valid. This provides better performance, and prevents unnecessary code execution and unnecessary errors. An example may include checking a child value of a value that was previously determined to be null. For example, if a list of people is null, you don't want to check that list for other validation errors because they will all fail. So, in that event, all of the following AndIf and AndIfNot statements are skipped. This can be reset by defining a new If or IfNot validation rule.
AndIf(user => user.User is null)
AndIf(user => user.User is null, "Custom error message.")
// Default Error: AndIf({expression})
AndIfNot(user => user.User is null)
AndIfNot(user => user.User is null, "Custom error message.")
// Default Error: AndIfNot({expression})
OrIf and OrIfNot
OrIf and OrIfNot are the opposite of AndIf and AndIfNot and only execute if a previous If rule fails validation. This can be reset by defining a new If or IfNot validation rule.
OrIf(user => user.User is null)
OrIf(user => user.User is null, "Custom error message.")
// Default Error: OrIf({expression})
OrIfNot(user => user.User is null)
OrIfNot(user => user.User is null, "Custom error message.")
// Default Error: OrIfNot({expression})
Built-in Validations
Check validators also include a large number of built-in validation rules. Each of these rules has their own predefined errors that will provide the parameters you are supplying in the error messages.
General
If you want to throw an error when the object you are checking is null, then you need to include IfNull(). If the object you are checking is null, none of the other validations will be checked. So, this is a good one to include.
IfNull()
// Error: The value is null
IfNotNull()
// Error: The value is not null
String
IfNotDate()
// Error: String {data.Value} is not a date
IfNotInteger()
// Error: String {data.Value} is not an integer
IfNotEmail()
IfNotEmail(RegexPattern, System.Text.RegularExpressions.RegexOptions.None)
// Error: String '{data.Value}' is not an email address
IfNotURL()
IfNotURL(RegexPattern, System.Text.RegularExpressions.RegexOptions.None)
// Error: String {data.Value} is not a URL
IfNotValidPassword()
IfNotValidPassword(8, 2, 2, 2, 2)
IfNotValidPassword(MinLength, Uppercase, Lowercase, Numbers, SpecialCharacters)
// Possible errors:
The password does not contain:
A minimum of {minLength} characters.
A minimum of {numUpper} upper-case characters.
A minimum of {numLower} lower-case characters.
A minimum of {numNumbers} numbers.
A minimum of {numSpecial} special characters.
IfMatches(@"\b[R]\w+")
IfMatches(@"\b[R]\w+", System.Text.RegularExpressions.RegexOptions.None)
// Error: String should not match the regular expressions pattern '{pattern}'
IfNotMatches(@"\b[R]\w+")
IfNotMatches(@"\b[R]\w+", System.Text.RegularExpressions.RegexOptions.None)
// Error: String should match the regular expressions pattern '{pattern}'
IfEmpty()
// Error: String is empty
IfWhitespace()
// Error: String is whitepace
IfEmptyOrWhitespace()
// Error: String is empty or whitespace
IfEquals("String")
IfEquals("String", StringComparison.InvariantCulture)
// Error: String should not be equal to '{compareString}' [StringComparison: '{compareType}']
IfNotEquals("String")
IfNotEquals("String", StringComparison.InvariantCulture)
// Error: String should be equal to '{compareString}' [StringComparison: '{compareType}']
IfLengthGreaterThan(5)
// Error: String has exceeded the character limit of {length} characters
IfLengthLessThan(5)
// Error: String does not meet the minimum character length of {length} characters
IfLengthEquals(5)
// Error: String length should not equal {length} characters
IfNotLengthEquals(5)
// Error: String length should equal {length} characters
IfEndsWith("abc")
IfEndsWith("abc", StringComparison.InvariantCulture)
// Error: String should not end with '{ending}' [StringComparison: '{compareType}']
IfNotEndsWith("abc")
IfNotEndsWith("abc", StringComparison.InvariantCulture)
// Error: String does not end with '{ending}' [StringComparison: '{compareType}']
IfStartsWith("abc")
IfStartsWith("abc", StringComparison.InvariantCulture)
// Error: String should not start with '{beginning}' [StringComparison: '{compareType}']
IfNotStartsWith("abc")
IfNotStartsWith("abc", StringComparison.InvariantCulture)
// Error: String does not start with '{beginning}' [StringComparison: '{compareType}']
IfContains("abc")
IfContains("abc", StringComparison.InvariantCulture)
// Error: String should not contain '{compare}' [StringComparison: '{compareType}']
IfNotContains("abc")
IfNotContains("abc", StringComparison.InvariantCulture)
// Error: String should contain '{compare}' [StringComparison: '{compareType}']
Arrays
IfEmpty()
// Error: The array is empty
IfNotEmpty()
// Error: The array is not empty
IfCount(5)
// Error: The item count should not be {count}
IfNotCount(5)
// Error: The item count is not {count}
IfCountGreaterThan(5)
// Error: The item count is greater than {count}
IfCountLessThan(5)
// Error: The item count is less than {count}
List
IfEmpty()
// Error: The list is empty
IfNotEmpty()
// Error: The list is not empty
IfCount(5)
// Error: The item count should not be {count}
IfNotCount(5)
// Error: The item count is not {count}
IfCountGreaterThan(5)
// Error: The item count is greater than {count}
IfCountLessThan(5)
// Error: The item count is less than {count}
Dictionary
IfEmpty()
// Error: Dictionary is empty
IfNotEmpty()
// Error: The Dictionary is not empty
IfCount(5)
// Error: The item count should not be {count}
IfNotCount(5)
// Error: The item count is not {count}
IfCountGreaterThan(5)
// Error: The item count is greater than {count}
IfCountLessThan(5)
// Error: The item count is less than {count}
DateTime
IfDaysOlderThan(5)
// Error: The datetime '{value}' is older than {days} days
IfNotDaysOlderThan(5)
// Error: The datetime '{value}' is not older than {days} days
IfMinutesOlderThan(60)
// Error: The datetime '{value}' is older than {minutes} minutes
IfNotMinutesOlderThan(60)
// Error: The datetime '{value}' is not older than {minutes} minutes
IfSecondsOlderThan(60)
// Error: The datetime '{value}' is older than {seconds} seconds
IfNotSecondsOlderThan(60)
// Error: The datetime '{value}' is not older than {seconds} seconds
IfMillisecondsOlderThan(6000)
// Error: The datetime '{value}' is older than {milliseconds} milliseconds
IfNotMillisecondsOlderThan(6000)
// Error: The datetime '{value}' is not older than {milliseconds} milliseconds
IfEarlierThan(dateTime)
// Error: The datetime '{value}' is earlier than '{dateTime}'
IfLaterThan(dateTime)
// Error: The datetime '{value}' is later than '{dateTime}'
IfEqual(dateTime)
// Error: The datetime '{value}' is equal to '{dateTime}'
IfNotEqual(dateTime)
// Error: The datetime '{value}' is not equal to '{dateTime}'
IfBetween(startTime, endTime)
// Error: The datetime '{value}' is between '{startTime}' and '{endTime}'
IfNotBetween(startTime, endTime)
// Error: The datetime '{value}' is not between '{startTime}' and '{endTime}'
IfUtcTime()
// Error: The datetime format is Utc
IfNotUtcTime()
// Error: The datetime format is not Utc
IfLocalTime()
// Error: The datetime format is local
IfNotLocalTime()
// Error: The datetime format is not local
IfUnspecifiedTimeFormat()
// Error: The datetime format is unspecified
IfDayLightSavingsTime()
// Error: The datetime '{value}' is on daylight savings time
IfNotDayLightSavingsTime()
// Error: The datetime '{value}' is not on daylight savings time
IfDefault()
// Error: The datetime is set to the default value
IfNotDefault()
// Error: The datetime is not set to the default value
IfSunday()
// Error: The day of the week should not be Sunday
IfNotSunday()
// Error: The day of the week should be Sunday
IfMonday()
// Error: The day of the week should not be Monday
IfNotMonday()
// Error: The day of the week should be Monday
IfTuesday()
// Error: The day of the week should not be Tuesday
IfNotTuesday()
// Error: The day of the week should be Tuesday
IfWednesday()
// Error: The day of the week should not be Wednesday
IfNotWednesday()
// Error: The day of the week should be Wednesday
IfThursday()
// Error: The day of the week should not be Thursday
IfNotThursday()
// Error: The day of the week should be Thursday
IfFriday()
// Error: The day of the week should not be Friday
IfNotFriday()
// Error: The day of the week should be Friday
IfSaturday()
// Error: The day of the week should not be Saturday
IfNotSaturday()
// Error: The day of the week should be Saturday
TimeOnly
IfDefault()
// Error: The timeonly is set to the default value of {value}
IfNotDefault()
// Error: The timeonly '{value}' is not set to the default value
IfMinValue()
// Error: The timeonly is set to the minimum value of {value}
IfNotMinValue()
// Error: The timeonly '{value}' is not set to the minimum value of {TimeOnly.MinValue}
IfMaxValue()
// Error: The timeonly is set to the maximum value of {value}
IfNotMaxValue()
// Error: The timeonly '{value}' is not set to the maximum value of {TimeOnly.MaxValue}
IfBetween(startTime, endTime)
// Error: The timeonly is between '{startTime}' and '{endTime}'
IfNotBetween(startTime, endTime)
// Error: The timeonly is not between '{startTime}' and '{endTime}'
DateOnly
IfDefault()
// Error: The dateonly is set to the default value of {value}
IfNotDefault()
// Error: The dateonly '{value}' is not set to the default value
IfMinValue()
// Error: The dateonly is set to the minimum value of {value}
IfNotMinValue()
// Error: The dateonly '{value}' is not set to the minimum value of {DateOnly.MinValue}
IfMaxValue()
// Error: The dateonly is set to the maximum value of {value}
IfNotMaxValue()
// Error: The dateonly '{value}' is not set to the maximum value of {DateOnly.MaxValue}
Double
IfNegative()
// Error: The double is negative
IfPositive()
// Error: The double is positive
IfZero()
// Error: The double is zero
IfNotZero()
// Error: The double is not zero
IfGreaterThan(5)
// Error: The double is greater than {value}
IfLessThan(5)
// Error: The double is less than {value}
IfEquals(5)
// Error: The double should not be {value}
IfNotEquals(5)
// Error: The double should be {value}
Float
IfBetween(startValue, endValue)
// Error: The float '{value}' is between '{startValue}' and '{endValue}'
IfNotBetween(startValue, endValue)
// Error: The float '{value}' is not between '{startValue}' and '{endValue}'
IfNegative()
// Error: The float is negative
IfPositive()
// Error: The float is positive
IfZero()
// Error: The float is zero
IfNotZero()
// Error: The float is not zero
IfGreaterThan(5)
// Error: The float is greater than {value}
IfLessThan(5)
// Error: The float is less than {value}
IfEquals(5)
// Error: The float should not be {value}
IfNotEquals(5)
// Error: The float should be {value}
Short (Int16)
IfBetween(startValue, endValue)
// Error: The number '{value}' is between '{startValue}' and '{endValue}'
IfNotBetween(startValue, endValue)
// Error: The number '{value}' is not between '{startValue}' and '{endValue}'
IfNegative()
// Error: The number is negative
IfPositive()
// Error: The number is positive
IfZero()
// Error: The number is zero
IfNotZero()
// Error: The number is not zero
IfGreaterThan(5)
// Error: The number is greater than {value}
IfLessThan(5)
// Error: The number is less than {value}
IfEquals(5)
// Error: The number should not be {value}
IfNotEquals(5)
// Error: The number should be {value}
Int (Int32)
IfBetween(startValue, endValue)
// Error: The number '{value}' is between '{startValue}' and '{endValue}'
IfNotBetween(startValue, endValue)
// Error: The number '{value}' is not between '{startValue}' and '{endValue}'
IfNegative()
// Error: The number is negative
IfPositive()
// Error: The number is positive
IfZero()
// Error: The number is zero
IfNotZero()
// Error: The number is not zero
IfGreaterThan(5)
// Error: The number is greater than {value}
IfLessThan(5)
// Error: The number is less than {value}
IfEquals(5)
// Error: The number should not be {value}
IfNotEquals(5)
// Error: The number should be {value}
Long (Int64)
IfBetween(startValue, endValue)
// Error: The number '{value}' is between '{startValue}' and '{endValue}'
IfNotBetween(startValue, endValue)
// Error: The number '{value}' is not between '{startValue}' and '{endValue}'
IfNegative()
// Error: The number is negative
IfPositive()
// Error: The number is positive
IfZero()
// Error: The number is zero
IfNotZero()
// Error: The number is not zero
IfGreaterThan(5)
// Error: The number is greater than {value}
IfLessThan(5)
// Error: The number is less than {value}
IfEquals(5)
// Error: The number should not be {value}
IfNotEquals(5)
// Error: The number should be {value}
UShort (UInt16)
IfBetween(startValue, endValue)
// Error: The number '{value}' is between '{startValue}' and '{endValue}'
IfNotBetween(startValue, endValue)
// Error: The number '{value}' is not between '{startValue}' and '{endValue}'
IfNegative()
// Error: The number is negative
IfPositive()
// Error: The number is positive
IfZero()
// Error: The number is zero
IfNotZero()
// Error: The number is not zero
IfGreaterThan(5)
// Error: The number is greater than {value}
IfLessThan(5)
// Error: The number is less than {value}
IfEquals(5)
// Error: The number should not be {value}
IfNotEquals(5)
// Error: The number should be {value}
UInt (UInt32)
IfBetween(startValue, endValue)
// Error: The number '{value}' is between '{startValue}' and '{endValue}'
IfNotBetween(startValue, endValue)
// Error: The number '{value}' is not between '{startValue}' and '{endValue}'
IfNegative()
// Error: The number is negative
IfPositive()
// Error: The number is positive
IfZero()
// Error: The number is zero
IfNotZero()
// Error: The number is not zero
IfGreaterThan(5)
// Error: The number is greater than {value}
IfLessThan(5)
// Error: The number is less than {value}
IfEquals(5)
// Error: The number should not be {value}
IfNotEquals(5)
// Error: The number should be {value}
ULong (UInt64)
IfBetween(startValue, endValue)
// Error: The number '{value}' is between '{startValue}' and '{endValue}'
IfNotBetween(startValue, endValue)
// Error: The number '{value}' is not between '{startValue}' and '{endValue}'
IfNegative()
// Error: The number is negative
IfPositive()
// Error: The number is positive
IfZero()
// Error: The number is zero
IfNotZero()
// Error: The number is not zero
IfGreaterThan(5)
// Error: The number is greater than {value}
IfLessThan(5)
// Error: The number is less than {value}
IfEquals(5)
// Error: The number should not be {value}
IfNotEquals(5)
// Error: The number should be {value}
Decimal
IfBetween(startValue, endValue)
// Error: The decimal '{value}' is between '{startValue}' and '{endValue}'
IfNotBetween(startValue, endValue)
// Error: The decimal '{value}' is not between '{startValue}' and '{endValue}'
IfNegative()
// Error: The decimal is negative
IfPositive()
// Error: The decimal is positive
IfZero()
// Error: The decimal is zero
IfNotZero()
// Error: The decimal is not zero
IfGreaterThan(5)
// Error: The decimal is greater than {value}
IfLessThan(5)
// Error: The decimal is less than {value}
IfEquals(5)
// Error: The decimal should not be {value}
IfNotEquals(5)
// Error: The decimal should be {value}
Uri
IfScheme()
// Error: Uri scheme should not be '{scheme}'
IfNotScheme()
// Error: Uri scheme is not '{scheme}'
IfAbsoluteUri()
// Error: Uri is absolute, consider changing it to relative
IfRelativeUri()
// Error: Uri is relative, consider changing it to absolute
IfUriPort(80)
// Error: Uri port should not be {port}
IfNotUriPort(80)
// Error: Uri port should be {port}
IfFile()
// Error: Uri is a file path
IfNotFile()
// Error: Uri is not a file
IfUnc()
// Error: Uri is a UNC path
IfNotUnc()
// Error: Uri is not a UNC path
IfLoopback()
// Error: Uri is the loopback address
IfNotLoopback()
// Error: Uri is not the loopback address
Extensibility
You can write your own custom extension methods anywhere in your project to write custom validators that are specific to your needs, similar to the following:
public static partial class CheckValidatorsExtensions
{
public static Check<List<T>?> IfEmpty<T>(this Check<List<T>?> data)
{
if (data.InvalidModel()) { return data; }
try
{
if (!data.Value.Any())
{
data.ThrowError("The list is empty.");
}
}
catch { }
return data;
}
}
Contributions
This project is being developed for free by me, Ryan Kueter, in my spare time. So, if you would like to contribute, please submit your ideas on the Github project page.
Product | Versions Compatible and additional computed target framework versions. |
---|---|
.NET | net6.0 is compatible. net6.0-android was computed. net6.0-ios was computed. net6.0-maccatalyst was computed. net6.0-macos was computed. net6.0-tvos was computed. net6.0-windows was computed. net7.0 was computed. net7.0-android was computed. net7.0-ios was computed. net7.0-maccatalyst was computed. net7.0-macos was computed. net7.0-tvos was computed. net7.0-windows was computed. net8.0 was computed. net8.0-android was computed. net8.0-browser was computed. net8.0-ios was computed. net8.0-maccatalyst was computed. net8.0-macos was computed. net8.0-tvos was computed. net8.0-windows was computed. |
-
net6.0
- No dependencies.
NuGet packages
This package is not used by any NuGet packages.
GitHub repositories
This package is not used by any popular GitHub repositories.
Version | Downloads | Last updated |
---|---|---|
1.1.32 | 106 | 3/30/2024 |
1.1.31 | 100 | 3/15/2024 |
1.1.30 | 232 | 11/25/2023 |
1.1.29 | 135 | 11/25/2023 |
1.1.28 | 155 | 10/18/2023 |
1.1.27 | 157 | 9/12/2023 |
1.1.26 | 150 | 9/11/2023 |
1.1.25 | 141 | 9/10/2023 |
1.1.24 | 171 | 9/9/2023 |
1.1.23 | 156 | 9/9/2023 |
1.1.22 | 158 | 9/9/2023 |
1.1.21 | 158 | 9/9/2023 |
1.1.20 | 154 | 9/9/2023 |
1.1.19 | 391 | 11/26/2022 |
1.1.18 | 430 | 9/30/2022 |
1.1.17 | 458 | 9/12/2022 |
1.1.16 | 426 | 8/15/2022 |
1.1.15 | 445 | 6/10/2022 |
1.1.14 | 437 | 6/10/2022 |
1.1.13 | 443 | 6/10/2022 |
1.1.12 | 438 | 6/7/2022 |
1.1.10 | 439 | 6/6/2022 |
1.1.9 | 454 | 6/6/2022 |
1.1.8 | 438 | 6/6/2022 |
1.1.7 | 421 | 6/6/2022 |
1.1.6 | 446 | 6/5/2022 |
1.1.5 | 429 | 6/5/2022 |
1.1.4 | 432 | 6/3/2022 |
1.1.3 | 446 | 6/3/2022 |
1.1.2 | 450 | 6/2/2022 |
1.1.0 | 472 | 6/2/2022 |
1.0.17 | 474 | 5/3/2022 |
1.0.16 | 470 | 5/2/2022 |
1.0.15 | 484 | 5/2/2022 |
1.0.14 | 469 | 2/22/2022 |
1.0.13 | 449 | 2/22/2022 |
Added UShort, UInt, and ULong validators.